Search results

I backed the rear screws out, took away the spacers, and clamped the flat iron between them again to sturdy it all up. I rode it to work and back thursday. I bounced off the thing pretty hard a few times to test it, even popped the clutch at high rpm a few times accelerating, I was very...

And the cycle sounds is 5.25? Sent from my VS985 4G using Tapatalk

Does anyone know what size the speakers in the vetter soundbox are?

Me personally, I'd put red strobes where the blue ones used to be and put one of my sirens on it, but I'm legally allowed to have those lol

Is that a Kawasaki specific fairing? Sent from my VS985 4G using Tapatalk

Took it out tonight for about 20 minutes, it worked quite well. A slight wiggle as expected since its not actually bolted or fixed in place other than the two pieces of all thread as guides. But not bad, it stayed in place in spite of the wiggle. I have mine sitting back a little far compared...

I'm hoping the wind will die down here tomorrow so I can go out, even if for just an hour or so. It's been so windy here that I was driving my Ford Explorer today and changed lanes, without wanting to. The wind hit me cross ways at 65 mph and forced me into the next lane. needless to say, I...

Sending prayers and we'll wishes.

Off topic... What kind of fairing is on that bike? I dig it!

Welcome to the forum, I'm recently new too. There are a lot of great people here, very helpful. Myself, I haven't owned anything but crotch rockets in 16 years out of 18. Never thought I'd like riding a cruiser till now, never heard of a vetter either. But now that I own one, I'll never...

I used a couple prices of all thread cut to length for a spacer, and clamped them between the brackets and the cargo rack.

I havent been able to give a test run, but ive wigled around on it quite a bit and so far it seems sturdy with a little spring in it.

http://www.amazon.com/gp/product/B00YC6JGSU?colid=3HG32WGVM7DIH&coliid=I1Q4XFXNC7WJ1L&ref_=wl_it_dp_o_pC_nS_ttl Heres #1, it says its out, but yesterday there were a few of them

I'm kind of torn between the three, but I'm leaning towards1 or 2

which one of these headlights do you guys like best?

Once the paint is dry, and I can take it for a test run, I'll try to get you an update.

Here's trial #1 after bending some aluminum stock I had into the right shape for a template. I took some semi-thick, (about 3/8 inch) metal flat stock, and started bending it into shape with my table vise. once done, I backed off the bolts going from my brackets and cargo bar, and slid the...

something like this maybe?

The red is the hinge around the hardware. (i haven't quite figured out the hardware yet. But if I were to use grade 8 hardware, or maybe keep door hinges? On open for suggestions. I was thinking 2 hinges per side, about 6-8" apart with the pilot hole in the center. Or, maybe even 3 hinges, the...