Search results

I had to cut the centre rails out on a Rickman fairing frame I had many years ago as the exhaust headers on the aftermarket exhaust came out further than the stock ones, it did not seem to make any difference to stability although Rickman used thicker tubing than Vetter for their mounts. Only...

Thanks for the info

Does anyone know if this a liner bag for top or side boxes?

And just a simple V Twin although 5000cc?

Viper V10 with UK registration plate?

CBX V12?

V12 Kawasaki anyone?

Yes I had to "google" what you guys over there called it!

There is a good write up on this here http://kawtriple.com/mraxl/tips/forkrestoration/forkrestoration.htm

Try "Glass or Ceramic Cooktop"?

There has just been about 50 mounts and brackets newly listed on eBay from a US seller, the link to one of them is below take a look at the rest of his items. http://www.ebay.co.uk/itm/1978-Honda-Vetter-GL1000-Fairing-Mounting-Mount-Brackets-Fair-Used-110798-/281721507891?hash=item4197e91033

I have used a Hob cleaner liquid for glass / ceramic hobs, also used it to clean old paint off the inside of fairing without leaving scratches.

This is my LED one under the fairing off the brake pipe splitter mounting bolts.

I will look into that mine is the standard 1980 Kawasaki one at the moment and the flash rate already doubles when you use the hazard lght switch.

Will try that out, not sure how it will effect flash rate of indicators with additional loading, will let you know.

Thanks for that and is similar to what I had planned, I have now just had delivered a white led light bar which I plan to mount off the front brake pipe splitter bracket, the indicators will be left as standard Vetter with just the running light feed to the second lamp filement disconnected.

Thanks for that very informative.

I would be interested in any ideas or suggestions.

Here is a picture of the hole with the grill and turn indicator removed, if you were planning to mount something in there I measured the diameter and its just under 44mm.

Its not a Vetter fairing but if you look here there is a bit of a story of how I restored my Rickman Polaris fairing. http://www.vetterowners.com/threads/rickman-polaris-for-z1000st.678/